Well water treatment consists of two aspects: one is to pressurize the well water, and the other is to purify the well water.
The purpose of well water pressurization is to make the well water use pressure like tap water at any time. The well water pressurization includes the well water being taken out from the well and maintaining a certain pressure, and how to control the water pump, protect the water pump, maintain the pressure, etc. Two aspects of the system.
Well water purification is more complicated, and the well water conditions in different places are different. For example, the groundwater of the loess high slope is generally high in fluorine, the groundwater of the Castel landform is generally high in calcium (commonly known as nitrate), and some groundwater contains iron. Manganese is too high, the situation varies greatly from place to place, and the treatment methods are quite different. In short, the treatment must be targeted, water quality tests should be carried out beforehand, and then targeted purification treatment based on the test results. At present, these treatment methods are relatively mature.
In addition to removing excess minerals from the water above, it is usually necessary to remove the turbidity and purification of the well water. In this respect, the physical filtration method is better. The primary filtration can be filtered by sand tank. The intermediate filtration can be filtered by PP cotton core and ceramic core. Deeper primary filtration is available with hollow ultrafiltration filtration with an accuracy of 0.01 UM and bacterial viruses can be filtered out.